# One platform to source wire harnesses and custom cable assemblies.

From a single prototype to recurring production, with no minimum order — quoted in 24 hours and built by a vetted global network.

- 24 h — Quote turnaround on a complete spec
- 10 days — Production lead times from 10 days
- 50+ — Carefully vetted manufacturing sites across the globe
- IPC-620 — Certificates available on request

### Three steps from drawing to delivery.
You upload a spec and approve a price. We'll take care of the rest.

1. **Upload your spec & get a quote** A drawing, BOM, wire schedule, EPLAN export — a photo of the harness you're replacing, or just a description of the build. A fixed price comes back within 24 hours.
2. **Review & confirm your quote** We make it production-ready before anything is built: connectors, wire gauges, strip lengths and tolerances normalised into a manufacturable spec, with anything missing flagged to you.
3. **Built & delivered** Production from 10 days, 100% continuity-tested, with test records and IPC-620 certificates on request. We ship worldwide, including Europe, the UK, the USA, Australia and Southeast Asia.

### Harnesses, cable assemblies, and everything under them.
Two shapes underneath all of it. A harness is multi-branch: several legs and connector ends held in a fixed geometry, built over a layout board. A cable assembly is discrete: two ends and the run between them.

- **Wire harnesses** (https://www.vernex.com/custom-wire-harnesses) — Multi-branch looms with breakouts, taping and sleeving, built over a layout board so the geometry repeats unit after unit.
- **Cable assemblies** (https://www.vernex.com/cable-assemblies) — Two ends and the run between them: cut, stripped, crimped or soldered, ferruled, sealed and tested.
  - **Ribbon, flat and IDC** (https://www.vernex.com/ribbon-flat-idc-cable-assemblies) — Bulk-terminated across the pitch: sockets, headers and DIP ends, daisy-chained or bridged, twisted-pair where the signal needs it.
  - **RF and coaxial** (https://www.vernex.com/rf-coaxial-cable-assemblies) — Connector series, cable type and impedance to the drawing, with braid termination, shield preparation and backshells.
  - **HV and battery** (https://www.vernex.com/hv-and-battery-cable-assemblies) — Lug crimping in heavy gauge, orange jacketing, touch-safe terminations, BMS sense looms and busbar assemblies.
- **Control panel wiring** (https://www.vernex.com/control-panel-wiring) — DIN rail layout, duct and routing, terminal blocks, wire marking and torque-documented fastening inside your enclosure.

**Other custom builds** — The list above is where most enquiries land, not a limit. Overmoulded assemblies, box builds, single-ended leads, sensor and actuator cables, and plenty that has no standard name — if it is cut, stripped, terminated or wired into something, describe it and we will tell you whether we can quote it.

### Quote a harness or cable assembly in 24 hours.
Upload a drawing, BOM, EPLAN export, or even photos of an existing assembly — any format works, and a description on its own is enough to start.

- Uploads are encrypted and NDA-protected
- If anything's missing, we'll ask — not guess
- Once you approve, we'll place your order with a vetted manufacturer from our network

### Where our harnesses and assemblies go to work.
Every sector below has its own qualification requirements. We match your project to a manufacturer that already builds to them.

- **Vehicles & off-highway** — Cab, chassis and engine harnesses, sealed and vibration-rated for trucks and off-highway machines.
- **OEM & electronics** — Board-to-board looms, IDC ribbon, FFC and internal interconnects for electronic products.
- **Medical & life science** — Biocompatible materials, full traceability and controlled-change production.
- **Robotics & automation** — High-flex drag-chain and torsion cable, servo, encoder and teach-pendant assemblies.
- **Industrial machinery** — Control-cabinet looms, sensor and actuator harnesses, IP67 connector systems.
- **RF & telecom** — RF and power assemblies, backplane test cables, PSU and control harnesses.
- **Energy & power** — Busbar links, battery-module and fuel-cell interconnects, inverter and BMS looms.
- **HVAC & building systems** — Sensor and thermistor leads, mains inlets and control harnesses for HVAC equipment.
- **Railroad** — EN 45545 fire-rated, halogen-free materials and vibration-resistant terminations.

### One interface. One counterparty.
Wire harness sourcing is fragmented, slow and capacity-constrained. We aggregate demand into a single digital interface, standardise the input — drawings, BOMs, EPLAN exports — into a manufacturable spec, and dispatch it to a curated network of global manufacturers.

Vernex stays the single counterparty throughout: one quote, one contract, one invoice — accountable for quote, quality and delivery, whichever partner physically builds your harness.

---

Canonical: https://www.vernex.com/
Index: https://www.vernex.com/llms.txt · https://www.vernex.com/llms-full.txt · https://www.vernex.com/capabilities.json