RF and coaxial cable assemblies, quoted in 24 hours.
Connector series, cable type, impedance and overall length — built to the drawing, with the braid termination and shield preparation the assembly needs. One counterparty for quote, quality and delivery.
All uploads are secure & protected by NDA.
24 h
Quote turnaround on a complete spec
10 days
Production lead times from 10 days
50+
Carefully vetted manufacturing sites across the globe
IPC-620
Certificates available on request
Three steps from drawing to delivery.
You upload a spec and approve a price. We'll take care of the rest.
Upload your spec & get a quote
A drawing, BOM, wire schedule, EPLAN export — a photo of the harness you're replacing, or just a description of the build. A fixed price comes back within 24 hours.
Review & confirm your quote
We make it production-ready before anything is built: connectors, wire gauges, strip lengths and tolerances normalised into a manufacturable spec, with anything missing flagged to you.
Built & delivered
Production from 10 days, 100% continuity-tested, with test records and IPC-620 certificates on request. We ship worldwide, including Europe, the UK, the USA, Australia and Southeast Asia.
Quote an RF or coaxial assembly in 24 hours.
Connector series at each end, cable type or an equivalent, impedance and overall length. A part number off the assembly you are replacing is enough to start.
- Uploads are encrypted and NDA-protected
- If anything's missing, we'll ask — not guess
- Once you approve, we'll place your order with a vetted manufacturer from our network
What our customers say
Everything went as expected, much appreciated. We will keep using your wire harness services in the future.
Capacity where your order needs it.
Every order goes to the partner best placed to build it — chosen for the processes your drawing needs, the certification it has to carry, and the lead time you are working to. Every manufacturing partner was carefully vetted before taking on work.
Region is a filter on an order, not a fixed answer. If your project has to be built in a particular country or economic area, say so on the enquiry and we will confirm at quote time whether we can place it there.
Where our coaxial assemblies go to work.
Every sector below has its own qualification requirements. We match your project to a manufacturer that already builds to them.
Vehicles & off-highway
Cab, chassis and engine harnesses, sealed and vibration-rated for trucks and off-highway machines.
OEM & electronics
Board-to-board looms, IDC ribbon, FFC and internal interconnects for electronic products.
Medical & life science
Biocompatible materials, full traceability and controlled-change production.
Robotics & automation
High-flex drag-chain and torsion cable, servo, encoder and teach-pendant assemblies.
Industrial machinery
Control-cabinet looms, sensor and actuator harnesses, IP67 connector systems.
RF & telecom
RF and power assemblies, backplane test cables, PSU and control harnesses.
Energy & power
Busbar links, battery-module and fuel-cell interconnects, inverter and BMS looms.
HVAC & building systems
Sensor and thermistor leads, mains inlets and control harnesses for HVAC equipment.
Railroad
EN 45545 fire-rated, halogen-free materials and vibration-resistant terminations.
Every connector series, cable type and termination we can quote.
Capabilities across our partner network for coaxial work. What is quoted here is the build: assemblies made to the drawing you supply.
Assembly
- Braid termination and shield preparation to the connector's own method
- Crimp, clamp and solder attachment as the connector series requires
- Semi-rigid and conformable cable formed to the bend radius on your drawing
- Backshells, boots, heat-shrink strain relief and moulded transitions
- Right-angle, bulkhead and panel-mount terminations
- Labelling, length marking and colour-coded boots to your scheme
Components
- SMA, BNC, TNC, N, MCX and MMCX connector series
- 50 Ω and 75 Ω cable, solid and stranded centre conductors
- RG-series cable and low-loss equivalents in the gauge on your drawing
- Single, double and triple-braid screening, with foil where specified
- Obsolescence checks and drop-in alternates at quote time
Test & documentation
- 100% continuity and centre-to-screen isolation against your drawing
- Connector retention and cable pull-force sampling per IPC/WHMA-A-620 class
- Insulation resistance and dielectric withstand where specified
- Lot traceability on cable, connectors and backshells
- First-article inspection reports and certificates on request
IPC/WHMA-A-620 is the industry standard for cable and wire harness assemblies. Certificates for your assigned manufacturer are available on request.
What is quoted here is the build. If your assembly has to be verified against a stated electrical performance figure before it ships, say so on the enquiry and we will come back on whether it can be arranged.
Questions engineers & buyers ask.
SMA, BNC, TNC, N, MCX and MMCX are everyday work. Anything else is a question of availability rather than capability — send the series and the cable type with the enquiry and we confirm at quote time.
Not as standard. The assembly is built to your drawing and checked for continuity, centre-to-screen isolation and workmanship. If a stated performance figure has to be confirmed before the parts ship, tell us at enquiry and we will come back on whether it can be arranged.
Yes, and it is the single most common thing missing from an RF enquiry. The connector series does not settle it on its own: BNC exists in both. Give the impedance and the cable type, or the part number of what you are replacing.
Yes, including forming to the bend radius on your drawing. Semi-rigid work needs the form dimensioned, so send a drawing where you have one — a photograph will not carry it.
Connector series and gender at each end, cable type or an equivalent, impedance, overall length and where it is measured from, and any backshell or boot. Anything missing, we ask.
Yes. There is no minimum on an order or on a quote — single assemblies and small matched sets are normal work here.
Ready to quote your coaxial assemblies?
- Quote
- 24 h
- Production
- 10 days
- Minimum
- None